SUNSHINE Power Supply 15V 2A

In stock
SKU
P-1502TN
DZD 4,200.00

SUNSHINE P1502TN 15V 2A Power Supply With Repair Mobile Phone

 

P1502TN  15V 2A Power Supply With Repair Mobile Phone

Fast Details for our 2A dc switching power supply

1. Constent Output current is adjustable 

2. Constent output voltage is adjustable 
3. Short circuit testing function; Support 2A current
4. Adjust current 2A 
5. Adjust 5V/15V/ custom voltage
6. iron structure, real materials.
7. Support mobile phone signal testing
8. Support Continuity test function

 

Specifications: 

Nominal working regulation

>Upgrade, small volume,lightweight, practical
>sufficient current, stable voltage
> Automatic protection/recovery
>Short circuit buzzer prompt

 

Work state

1. Output voltage: 0-15 V (adjustable)

2. Output current: 0-2A

3. Recovery time: 100us or less

4. Ripple noise 1 MVRMS or less (RMS)

5. Protect the start is greater than the maximum 10% of the nominal value

 

Direction for use: 

1. AC input: ac input is 220V +/-10% for 50Hz (if it is 110V +/- 10% for 60HZ will be in the back of

my case)

2. Instructions: do not use where the environmental temperature 40  ℃, left and right sides and

machine should leave enough space in the back, good for heat dissipation. Power tube temperature

can reach 100  ℃, use for a long time, please do not touch.

 

Features:

1. Automatic protection 

2. Auto reply

3. Voltage measurement (measuring range: 1-50V)

4. GSM signal test 

5. Buzzer alarm prompt

6. 1A and 2A current translation (Note: P1502T is with time function)

 

1 set including all the parts:

1 x dc switching power supply machine

1 x  set cord for testing

2 x sets cables

 

P1502TN  15V 2A Power Supply With Repair Mobile Phone

1. Plugged in;

2. Will the power switch as to "ON" position, the power supply;

3. The toggle switch to " output according to" the edge;

4. The VOLTAGE regulation knob to the requireed output VOLTAGE value;

5. The left two teminal voltage required for the output value, red for position, black for negative;

6. Normal machine: the positive connection phone positive, negative phones connect the cathodeIntelligent machines: the positive connection phone positive and negative connection phone next to the cathode and negative interface, the cathode connecting two interfaces.

7.Toggle switch to the voltage measurement when the edge, pens and lines to connect the output interface, the digital display shows for you measured voltage (note: the voltage measuring range: 0-50V)

8. GSM signal test: the phone is in a state of emission, lattive beating strength;

9. 500MA, 2A current switching device: upward: 2A scale, the downside: 500MA scale, on table computers, mobile phones and other electronic product maintenance, ma dial 500 for slight leakage phone design.

 

P1502TN  15V 2A Power Supply With Repair Mobile Phone

 

P1502TN  15V 2A Power Supply With Repair Mobile PhoneP1502TN  15V 2A Power Supply With Repair Mobile Phone

More Information
Product Types REPAIR TOOL
Manufacturer SUNSHINE
Write Your Own Review
You're reviewing:SUNSHINE Power Supply 15V 2A
Your Rating
Back to Top