KADA 858D+ 2in1 SMD Rework Station

Product Usage
1. in keeping with various original devices dismantles the soldering such as:SOIC,CHIP, QFP, PLCC, BGA..etc..
2. Used for the caloric shrink, dry, divided by the lacker and divided by to glue, defrost,preheat, disinfect, the glue welds the iso -.
3. Blow soldering band lastics component, the machine of ringing, the tail puts the constant shape in iso – in mount in diamidine in inside, blow soldering wireways board anti effervescence Dismantle the constant color in housing in plate, blow the core plate of BGA to break not easily.
4. The temperature goes up with quick,3 seconds arrive the setting temperature, the intelligence induceds.

Spceifications
Power supply voltage:Ac: 220V/ 50Hz

Soldering iron pen
Power disption: 40W (30V-90W P-P)
Temperature range：20—– 480℃
Heating element: Ceramic longevity life heat rum core plate
it is unleaded to defend to oxidize the mouth of soldering:The high conduction is lengthways the life
Output vttage：22V

Hot breeze
Power disipation：550W
Temperature rang：100℃—- -450℃
Heating element：Bearing the heat ceramic ,alloy belongs to the silk
Soldering iron prinipal adjoin terrestrial electricity potential:≤2mV
Soldering iron prinipal adjoin ground resistance: ≤1 Ω
Tuyere adjoin ground resistance:≤2Ω
Supply voltage: The 12 Vs of d.c.
The type of air pump: Turbine quinonoid formula none carbon brush continuous current dynamo
Air volume:120 liter/ minute